//Manufacture
plan- Box pleat trousers//
1.
Lay
out correct pattern pieces and cut out fabric and interfacing
2.
Mark
the wrong side of the fabric and notches are in place
3.
Overlock
each pattern piece
4.
Stitch
the front and back sides together following a 1cm seam allowance (On the left
leg leave a 10cm gap at the top of the trouser)
5.
Stitch
the inside of the leg and press open
6.
Press
open the seams
7.
Repeat
the steps above for the opposite leg
8.
Attach
the middle of the legs together making sure the inside leg seams match in the
middle
9.
Iron
on the interfacing to waist band
10.
Attach
eyelets to the C.F of the waist band
11.
Attach
the waistband to the outside of the trousers, leaving a gap at the left side
seam (to insert zip)
12.
Fold
the opposite side under by 1cm and topstitch on the right side of the fabric
13.
Bias
bind the zip
14.
Insert
closed ended invisible zip to the left side
15.
Bias
bind the hem of the trousers
16.
Fold
the hem up 5 cm and press
17.
Hand
stitch in place
No comments:
Post a Comment